Part number D6002921-1 with NSN 5905013420717 is now available in our ready-to-ship inventory. This part number is a Resistor Variable Nonwire Wound manufactured by Clarostat Sensors And Controls CAGE Code 12697 . Are you looking for a quick and competitive quote for this part number? Just fill out the Request for Quote (RFQ) form to get started. As you fill out the RFQ form, make sure that you answer all asterisk-marked (*) fields like Need Parts By and Quantity (ea) completely and carefully. Your response to these fields will be used to determine the bulk of your quote. Within 15 minutes of receiving your RFQ, one of our dedicated sales representatives will contact you with your quote.
They are assigned and regulated by the Defense Logistics Agency and used by all members of the North Atlantic Treaty Organization (NATO). Are you interested in learning more about NSN 5905013420717? If so, call us at our toll-free number, +1-714-705-4780, or email us at sales@asapaerospacehub.com. We’re available 24/7x365. Also if you looking to buy D6002921-1 under CAGE Code 12697 for Clarostat Sensors And Controls then request a instant quote from us today.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-342-0717 Item Description: Resistor Variable Nonwire Wound | 5905 | 013420717 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | G | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| D6002921-1 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| ABJT | TERMINAL LENGTH | 0.250 INCHES MINIMUM |
| ABXF | SHAFT LENGTH | 1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.781 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.475 INCHES MINIMUM AND 0.525 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEEA | SWITCH TYPE | PUSH-PULL |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 30.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES |
| AEFN | NONTURN DEVICE LOCATION | AT 4 OCLOCK AND AT 8 OCLOCK |
| AEFP | NONTURN DEVICE RADIUS | 0.500 INCHES NOMINAL |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | III END ITEM IDENTIFICATION | 5895-01-233-2919 COMMUNICATION SYSTEM CONTROL GROUP |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF AND SWITCH |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| PMLC | III PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
| TEST | TEST DATA DOCUMENT | 57045-D6002921 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEFM | MAXIMUM STOP TORQUE | 48.00 INCH-OUNCES |
| AEGH | SWITCH OPERATING POSITION | ANY POSITION OF ROTATION TRAVEL |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| PRMT | III PRECIOUS MATERIAL | GOLD |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 290.0 MINIMUM AND 300.0 MAXIMUM |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBME | III CUBIC MEASURE | 0.195 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 290.0 MINIMUM AND 300.0 MAXIMUM |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -150.0 TO 150.0 SINGLE SECTION |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 0.250 DC |
ASAP Aerospace Hub, owned and operated by ASAP Semiconductor, is an industry-leading supplier of D6002921-1 part by Clarostat Sensors And Controls of CAGE Code 12697 with a comprehensive inventory of more than 10 million aviation manufacturer parts and NSNs, including NSN 5905013420717. As an AS9120B, ISO 9001:2015 certified and FAA 0056B accredited member of the Aviation Suppliers Association (ASA), we’re dedicated to meeting all of our customers’ needs as quickly and efficiently as possible. Our advanced shipping facilities are in USA.
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Remember Us When You’re Looking for Competitively Priced, High-Quality Aviation Parts.
Request for Quote
