Have you been searching for Switching And Control Test Equipment parts? ASAP Aerospace Hub is owned and operated by ASAP Semiconductor, a leading parts distributor that offers some of the shortest lead-times in the industry.
| Part No | Manufacturer | Description | QTY | RFQ |
|---|---|---|---|---|
| NI-SCXI-1169-100-Channel-SPST-Form-A-Relays | national aerospace standards co | the national instruments scxi-1169 is a 100-channel general-purpose switch module featuring spst (form a) armature relays. ideal for medium-power automated test loads, this module offers maximum relay density, with 100 latching relays in a single scxi slot. the ni scxi-1169 can switch up to 100 vdc/100 vac or up to 1 a. this module is fully software-programmable and contains a 32,000-step scan list for deterministic scanning capability. | Avl | RFQ |
| NI-SCXI-1163R-32-Channel-Optically-Isolated-Solid-State-Relay-Switch | national aerospace standards co | the national instruments scxi-1163r includes 32 normally open, or form a, optically isolated solid-state relays, arranged into eight banks of four relays with one common pole for each bank. you can use the ni scxi-1163r to switch high-voltage loads, up to 240 vac/vdc and up to 200 ma. you can easily integrate scxi-1163r modules into existing scxi systems without additional daq devices or cabling. for similar functionality in pxi, consider the ni pxi-2576 which provides 16 banks of 4x1 (2-wire) multiplexers at a cheaper cost per relay. | Avl | RFQ |
| NI-PXIe-2575-196-Channel-Multiplexer-Switch-Module | national aerospace standards co | the ni pxie-2575 is a high-density multiplexer switch module. with 196 one-wire channels or 98 two-wire channels, the ni pxie-2575 is capable of routing hundreds of signals to measurement devices or from source units. each channel uses robust electromechanical relays and is capable of switching up to 100 vdc/100 vac or 1 a. with a scanning speed of up to 140 cycles/s, the ni pxie-2575 acts as an effective front end for high-channel-count automated test applications. | Avl | RFQ |
| NI-PXIe-2569-High-Density-General-Purpose-SPST-Relays | national aerospace standards co | the ni pxie-2569 is a 100-channel general-purpose switch module that features spst (form a) armature relays. ideal for medium-power automated test loads, this module offers maximum relay density, with 100 latching relays in a single pxi express slot. the ni pxie-2569 can switch up to 100 vdc/100 vac or up to 1 a. this fully software-programmable module contains a 32,000-step scan list for deterministic scanning capability. | Avl | RFQ |
| NI-PXIe-2529-128-Crosspoint-Matrix-Switch | national aerospace standards co | the ni pxie-2529 is a high-density matrix built for high-channel-count switching applications. the module is a 2-wire matrix, configurable with front-mounting terminal blocks to achieve two different matrix configurations (4x32 and 8x16). the ni pxie-2529 is designed to work well with both low- and high-voltage levels. for low-voltage measurements, the ni pxie-2529 uses relays with low thermal offset to ensure accurate measurements. these same relays can handle up to 150 vrms or 150 vdc. | Avl | RFQ |
| NI-PXI-2599-26 5-GHz-Dual-SPDT-Relays | national aerospace standards co | the ni pxi-2599 is a dual single-pole double-throw (spdt) relay switch module for routing rf or microwave signals in automated test applications. while designed to operate with less than 1 db insertion loss up to 26.5 ghz, the pxi-2599 appears almost invisible to signals at much lower frequencies as well. use this module for basic signal routing or inserting and removing components in a signal path. the pxi-2599 is also well-suited for passing high-order harmonics from rf upconverters, such as the ni pxie-5673 6.6 ghz rf signal generator, or routing multiple sources to rf downconverters, such as the ni pxie-5663 6.6 ghz rf signal analyzer. | Avl | RFQ |
| NI-PXI-2586-10-Channel-12-A-SPST-Form-A-Relays | national aerospace standards co | the national instruments pxi-2586 is a high-power, general-purpose switch in a single-slot, 3u pxi module. it has 10 independent spst (form a) relays with low contact resistance and high isolation voltage. the ni pxi-2586, rated for both high currents (up to 12 a) and high voltages (up to 300 vdc/300 vac), is ideal for switching power signals and loads in control applications and battery, power supply, and automotive testing. | Avl | RFQ |
| NI-PXI-2575-196-Channel-Multiplexer-Switch-Module | national aerospace standards co | the national instruments pxi-2575 is a high-density multiplexer switch module. with 196 1-wire channels or 98 2-wire channels, the ni pxi-2575 is capable of routing hundreds of signals to measurement devices or fromsource units. each channel uses robust electromechanical relays and is capable of switching up to 100 vdc/100 vac or 1 a. with a scanning speed of up to 140 cycles/s, the pxi-2575 acts as an excellent front-end for high-channel-count automated test applications. | Avl | RFQ |
| NI-PXI-2570-High-Channel-Count-General-Purpose-Relay-Switch | national aerospace standards co | the national instruments pxi-2570 is a 40-channel, general-purpose switch module. featuring independent spdt (form c) relays, the ni pxi-2570 maximizes relay density in a single pxi slot. each relay contains a normally closed (nc), normally open (no), and common terminal (com) and can handle up to 100 vdc/100 vac or up to 1 a of current. with 40 channels per module, you can switch several hundred ate loads in a single pxi chassis or thousands of channels in a multiple-chassis configuration. | Avl | RFQ |
| NI-PXI-2569-High-Density-General-Purpose-SPST-Relays | national aerospace standards co | the national instruments pxi-2569 is a 100-channel general-purpose switch module, featuring spst (form a) armature relays. ideal for medium-power automated test loads, this module offers maximum relay density, with 100 latching relays in a single pxi slot. the ni pxi-2569 can switch up to 100 vdc/100 vac or up to 1 a. this fully software-programmable module and contains a 32,000-step scan list for deterministic scanning capability. | Avl | RFQ |
| NI-PXI-2568-Medium-Power-General-Purpose-SPST-Relays | national aerospace standards co | the national instruments pxi-2568 is a general-purpose 31-channel switch module, featuring independent spst (form a) armature relays. each relay is latching with very low on-resistance and low thermal offsets. the ni pxi-2568 can switch up to 2 a at 30 vac/30 vdc. with an efficient coupling of voltage/current capability and relay density, the pxi-2568 is ideal for automated test equipment (ate) loads or for controlling heaters, lights, and fans. | Avl | RFQ |
| NI-PXI-2566-High-Current-General-Purpose-Relay-Switch | national aerospace standards co | the national instruments pxi-2566 is a general-purpose switch module with 16 channels. this module has independent spdt (form c) nonlatching relays with very low on-resistance and low thermal offsets. it can switch up to 2 a at 30 vac/30 vdc and can carry 5 a per channel. hence, it is ideal for switching, routing, and controlling high-current signals. each relay channel has a normally closed (nc), normally open (no), and common (com) terminal. | Avl | RFQ |
| NI-PXI-2565-16-Channel-High-Power-General-Purpose-Relay-Switch | national aerospace standards co | the national instruments pxi-2565 is a 16-channel general-purpose relay switch module that delivers high current switching of dc power supplies, ac line power, and ac/dc current sources. the ni pxi-2565has 16 independent form a nonlatching socketed relays, which can be replaced easily in the field. the module switches up to 5 a at 30 vdc and 7 a at 250 vac. full operation of the module is controlled with the ni-switch software driver. | Avl | RFQ |
| NI-PXI-2564-16-Channel-5-A-SPST-Form-A-Relays | national aerospace standards co | the national instruments pxi-2564 is a 5 a, general-purpose switch module in a single-slot, 3u pxi module. it has 16 independentspst (form a) relays with low contact resistance and high isolation voltage. the ni pxi-2564 is ideal for switching medium tohigh-power signals and loads in military, automotive, or automated test applications. | Avl | RFQ |
| NI-PXI-2534-256-Crosspoint-SSR-Matrix | national aerospace standards co | the national instruments pxi-2534 high-density solid-state relay (ssr) matrix module features 256 crosspoints in a compact, single-slot, 3u pxi form factor. the ni pxi-2534 is configured as a 4x64 one-wire matrix. because the module uses ssr technology, it offers unique benefits such as unlimited mechanical lifetime and the ability to route 55 w simultaneously on all channels (unlimited simultaneous connections). these features make the pxi-2534 ideal for routing general-purpose signals in high-density matrix applications. connecting signals to the pxi-2534 the pxi-2534 breaks out switch connections into a single 68-pin scsi connector. you can connect signals to the pxi-2534 using the ni tb-2637 front-mounting terminal block. for remote connectivity, you can use the ni sh68-68s cable, which connects to a remote, din-rail-mountable terminal block (ni tbx-68). both methods provide screw-terminal connectivity. ni switch executive switch management software ni switch executive is an intelligent switch management and routing application. with ni switch executive, you gain increased development productivity by interactively configuring and naming switch modules, external connections, and signal routes. you also increase test code reuse and system performance with switch programming in conjunction with ni teststand, labview, and measurement studio. these features are especially important when using high-density switch modules such as the pxi-2534. ultimately, ni switch executive simplifies switch system configuration and increases test performance, lowering your cost to test. | Avl | RFQ |
| NI-PXI-2533-256-Crosspoint-SSR-Matrix | national aerospace standards co | the national instruments pxi-2533 high-density solid-state relay (ssr) matrix module features 256 crosspoints in a compact, single-slot, 3u pxi form factor. the ni pxi-2533 is configured as a 4x64 one-wire matrix. because the module uses ssr technology, it offers unique benefits such as unlimited mechanical lifetime and the ability to route 55 w simultaneously on all channels (unlimited simultaneous connections). these features make the pxi-2533 ideal for routing general-purpose signals in high-density matrix applications. connecting signals to the pxi-2533 the pxi-2533 breaks out switch connections into a single 68-pin scsi connector. you can connect signals to the pxi-2533 using the ni tb-2633 front-mounting terminal block. for remote connectivity, you can use the ni sh68-68s cable, which connects to a remote, din-rail-mountable terminal block (ni tbx-68). both methods provide screw-terminal connectivity. ni switch executive switch management software ni switch executive is an intelligent switch management and routing application. with ni switch executive, you gain increased development productivity by interactively configuring and naming switch modules, external connections, and signal routes. you also increase test code reuse and system performance with switch programming in conjunction with ni teststand, labview, and measurement studio. these features are especially important when using high-density switch modules such as the pxi-2533. ultimately, ni switch executive simplifies switch system configuration and increases test performance, lowering your cost to test. | Avl | RFQ |
| NI-PXI-2529-128-Crosspoint-Matrix-Switch | national aerospace standards co | the national instruments pxi-2529 is a high-density matrix built to serve high-channel-count switching applications. the module is a 2-wire matrix, configurable with front-mounting terminal blocks to achieve two different matrix configurations (4x32 and 8x16). the ni pxi-2529 is designed to work well with both low- and high-voltage levels. for low-voltage measurements, the pxi-2529 uses relays with low thermal offset to ensure accurate measurements. these same relays can handle up to 150 vrms or 150 vdc. | Avl | RFQ |
| NI-PXI-2503-Low-Voltage-Multiplexer Matrix-Relay-Switch | national aerospace standards co | the national instruments pxi-2503 performs as a multiplexer or matrix switch. it switches signals up to 60 vdc or 30 vrms. for low-voltage measurements, such as thermocouple signals, the ni pxi-2503 relays have very low thermal offset (less than 2 ¦v) for accurate measurements. for automotive-level voltage measurements, the pxi-2503 handles up to 1 a at 30 vdc. | Avl | RFQ |
| NI-9505-Full-H-Bridge-Brushed-DC-Servo-Drive-Module | national aerospace standards co | the ni 9505 module is a full h-bridge servo motor drive for direct connectivity to actuators such as fractional horsepower brushed dc servo motors, relays, lamps, solenoids, and valves. with its low power consumption and small size, combined with the reconfigurability and performance of the field-programmable gate array (fpga), you can create intelligent, energy-efficient control systems using the ni labview graphical system design platform. the ni 9505 delivers continuous current of up to 5 a at 40 ¦c (or 1 a at 70 ¦c) at 30 v. to increase the output power of the module, national instruments offers an additional screw-terminal accessory you can use in place of the standard screw terminal included with the ni 9505 module. with the ni 9931 screw-terminal accessory, the ni 9505 can deliver a maximum current of 7.3 a at 40 ¦c (or 1 a at 70 ¦c). the ni 9505 benefits electronics engineers designing consumer appliances, industrial control engineers designing small- to medium-sized machines, and automotive engineers working on rapid prototyping applications. | Avl | RFQ |
| Model-7071-8x12-General-Purpose-Matrix-Card-for-Models-707A-and-708 | keithley instruments | the model 7071 general purpose matrix card is an 8x12 configuration that switches high, low, and guard at each of the 96 relay crosspoints. the eight rows are connected automatically to the general purpose analog backplane when the matrix card is installed into the 707a and 708a mainframe. this allows for easy expansion in 12 column increments and eliminates the requirement for wiring between cards. | Avl | RFQ |
| Model-7013-S-Isolated-20-Ch-Relay-Switch-w Screw-Terminals-for-Models-7001-and-700 | keithley instruments | NA | Avl | RFQ |
| Model-7013-C-Isolated-20-Ch-Relay-Switch-w Mass-Terminated-Connector-for-Models-7001-and-700 | keithley instruments | NA | Avl | RFQ |
| Model-3740-32-channel-Isolated-Switch-Card | keithley instruments | the model 3740 offers 28 general-purpose form c channels that are ideal for routing power or other control devices. for higher power applications of up to 7a, four additional high current form a channels are provided. | Avl | RFQ |
| Model-3730-6 16-High-Density-Matrix-Card | keithley instruments | the model 3730 is a two-pole, 6 row by 16 column matrix card. it can connect up to six differential instrument channels to any combination of 16 duts (devices under test). any row can be connected to the series 3700 mainframe backplane by using the analog backplane connection relays. this allows for easy matrix column expansion. a matrix of up to 6 rows by 96 columns can be supported within a single model 3706 mainframe (with six model 3730 cards). | Avl | RFQ |
| Model-3723-Dual-1 30-High-Speed-Reed-Relay-Multiplexer-Card | keithley instruments | the model 3723 offers two independent banks of high speed 1x30 two-pole multiplexers that are ideal for high speed scanning applications. the two banks can automatically be connected to the series 3700 mainframe backplane and optional dmm through the analog backplane connection relays. this connection allows the mainframe to reconfigure the model 3723 as a single 1x60 twopole multiplexer or as a single 1x120 single-pole multiplexer. it also enables card-to-card expansion for even larger configurations. | Avl | RFQ |
| FP-RLY-420 | national aerospace standards co | the fp-rly-420 has 8 spst relays for switching general-purpose signals and loads. the fp-rly-420 module installs onto a universal terminal base, which supplies either screw or spring terminals for field i/o wiring. the terminal base also buses module power from the network module, and communicates status and control between the fp-rly-420 module and the network module. | Avl | RFQ |
| 778262-01 | national aerospace standards co | 68vhdci-50f ssr 8,16,24 channel cable adapter | Avl | RFQ |
| 777518-422 | national aerospace standards co | fp-rly-422, 4 channel relay module (not for new design) | Avl | RFQ |
| 777518-420 | national aerospace standards co | fp-rly-420 8 ch spst relay output module (not for new design) | Avl | RFQ |
| 777081-01 | national aerospace standards co | electromechanical relay,16 spdt without cable | Avl | RFQ |
| 777080-01 | national aerospace standards co | electromechanical relay,8 spdt without cable | Avl | RFQ |
| 7037-D | keithley instruments | model 7037-d single-pole relay digital i/o card w/ 30 independent switches, 10 independent digital i | Avl | RFQ |
| 7019-C | keithley instruments | model 7019-c 6-wire ohms matrix card w/ mass-terminated 96-pin connector (for models 7001 and 7002) | Avl | RFQ |
| 7018-S | keithley instruments | model 7018-s dual 1x14 mux card w/ detachable screw terminal connector (for models 7001 and 7002) | Avl | RFQ |
| 7018-C | keithley instruments | model 7018-c dual 1x14 mux card w/ mass-terminated 96-pin connector (for models 7001 and 7002) | Avl | RFQ |
| 7015-S | keithley instruments | model 7015-s quad 1x10 solid-state mux card w/ detachable screw terminal connector (for models 7001 | Avl | RFQ |
| 7015-C | keithley instruments | model 7015-c quad 1x10 solid-state mux card w/ mass-terminated 96-pin connector (for models 7001 and | Avl | RFQ |
| 7013-S | keithley instruments | model 7013-s isolated, 20-ch relay switch w/ screw terminals (for models 7001 and 7002) | Avl | RFQ |
| 7013-C | keithley instruments | model 7013-c isolated, 20-ch relay switch w/ mass-terminated connector (for models 7001 and 7002) | Avl | RFQ |
| 7012-C | keithley instruments | model 7012-c 4x10 matrix card w/ mass-terminated connector (for models 7001 and 7002) | Avl | RFQ |
| 7011-C | keithley instruments | model 7011-c quad 1x10 mux w/ mass-terminated connector (for models 7001 and 7002) | Avl | RFQ |
| 197546-01 | national aerospace standards co | cable assy, 68 pos vhdci conn to eight 9 pos d-sub, rs 485, 1m | Avl | RFQ |
| 183285-02 | national aerospace standards co | x13 gpib cable, microd25 to shielded cable/standard connector, 2m | Avl | RFQ |
| 183285-01 | national aerospace standards co | x13 gpib cable, microd25 to shielded cable/standard connector, 1m | Avl | RFQ |
| 182844-01 | national aerospace standards co | db-9 terminating connector for rs-485 networks | Avl | RFQ |
Low Price
Find it fast
Quality guaranteed
Get it fast
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Remember Us When You’re Looking for Competitively Priced, High-Quality Aviation Parts.
Request for Quote