Have you been searching for Data Acquisition Systems And Equipment parts? ASAP Aerospace Hub is owned and operated by ASAP Semiconductor, a leading parts distributor that offers some of the shortest lead-times in the industry.
| Part No | Manufacturer | Description | QTY | RFQ |
|---|---|---|---|---|
| PIO-SSR-120 | keithley instruments | model pio-ssr-120 120-ch, p24 ssr compatible, isa board w/ digital i/o | Avl | RFQ |
| PIO-32I O | keithley instruments | model pio-32i/o isolated, isa boards w/ 16-ch digital inputs and 16-ch relay outputs | Avl | RFQ |
| PDISO-8 | keithley instruments | model pdiso-8 isolated, isa board w/ 8 digital inputs and 8 relay outputs | Avl | RFQ |
| NI-WLS-9481-4-Channel-60-VDC-250-Vrms-SPST-Electromechanical-Relay | national aerospace standards co | NA | Avl | RFQ |
| NI-USB-9481-USB-Based-High-Voltage-Relay-Output | national aerospace standards co | the national instruments usb-9481 is a data acquisition module with integrated signal conditioning that provides plug-and-play connectivity via usb for faster setup and measurements. this module has four form a electromechanical relays that can switch up to 30 vdc at 2a, 60 vdc at 1 a and 250 vac at 2 a. each channel also has an led hardware indicator for the state of that channel. in addition, this module includes 250 vrms channel-to-earth ground isolation for safety, noise immunity and high common-mode voltage range. this usb data acquisition module is compatible with only microsoft windows oss using ni-daqmx driver software. browse the information in the resources tab to about ni-daqmx or download the driver. this usb data acquisition module is not compatible with the traditional ni-daq (legacy) driver. every ni usb data acquisition module includes a copy of ni labview signalexpress le so you can quickly acquire, analyze, and present data without programming. in addition to labview signalexpress, usb data acquisition modules are compatible with the following versions (or later) of ni application software û labview 7.x, labwindowsö/cvi 7.x, or measurement studio 7.x; or labview with the labview real-time module 7.1. usb data acquisition modules are also compatible with visual studio .net, c/c++, and visual basic 6. for applications that require a higher channel count, consider ni scc or ni scxi signal conditioning hardware. | Avl | RFQ |
| NI-USB-6525-8-Solid-State-Relays-8-DI-Counter-Ch-to-Ch-Isolated | national aerospace standards co | the ni usb-6525 is a bus-powered usb device with eight normally open solid-state relay outputs featuring 60 vdc/30 vrms switching voltage and 500 ma/ch maximum switching current. the solid-state relay outputs are ideal for controlling pumps, valves, motors, and various other industrial actuators. the usb-6525 also features eight ¦60 vdc channel-to-channel isolated digital inputs to read from industrial digital sensors. you can use one of the digital input channels as a 5 khz, 32-bit counter for counting digital pulses and measuring frequency and pulse widths. isolated channels break ground loops and offer protection from noise and spikes on external signals. for added ease of use and reliability, the usb-6525 features built-in screw terminals and strain relief. industrial feature set ni industrial digital i/o devices offer a set of high-reliability features designed to automate even the most demanding applications. programmable power-up states provide safe operation when connected to pumps, valves, motors, and relays. digital i/o watchdog timers detect computer or application crashes and ensure safe recovery. change detection triggers your application and performs a read operation after a digital event with minimal processor usage. programmable input filters eliminate glitches/spikes and remove noise. driver software the usb-6525 works with ni-daqmx driver software, which features an easy-to-use and intuitive interface for programming. the device, which is compatible with ni labview, ni labwindowsö/cvi, ansi c/c++, c#, visual basic .net, and visual basic 6.0, works with windows and labview real-time oss. the mark labwindows is used under a license from microsoft corporation. windows is a registered trademark of microsoft corporation in the united states and other countries. | Avl | RFQ |
| NI-PXI-6527-24-Input-24-Output-Ch-Ch-Isolated-Digital-I O-for-PXI | national aerospace standards co | the national instruments pxi-6527 is a 48-bit, parallel, isolated digital i/o interface module. it has 24 digital inputs and 24 digital switch (ssr) outputs, completely jumper free. with the ni pxi-6527, you can sense digital levels up to 28 vdc (1 v logic low threshold, 2 v logic high threshold) and switch currents up to 120 ma. for new designs, ni recommends the pxi-6514 or pxi-6515 for 30 vdc range and bank optical isolation, or the pxi-6528 for 60 vdc range and channel-channel optical isolation. | Avl | RFQ |
| NI-PXI-6521-150-V-Mechanical-Relay-Outputs-30-V-Digital-Inputs | national aerospace standards co | the national instruments pxi-6521 is an industrial digital i/o module with eight 150 vac/vdc relay outputs with maximum switching power of 60 w, and eight ¦30 vdc digital inputs with 60 v channel-to-channel isolation and industry-standard 24 v logic levels. the digital inputs offer connectivity to both sinking and sourcing signals. the ni pxi-6521 is a ul listed device with 60 v continuous and 620 vrms withstand (5 s) isolation. for added safety the pxi-6521 requires a keyed connector. for added reliability, the module features watchdog timers to recover from a variety of computer and application faults. it also features programmable power-up states, digital filtering, and change detection for optimal control over your application. the pxi-6521 offers a keyed 37-pin d-sub connector for connectivity to ni low-cost high-voltage accessories. pxi-6521 takes advantage of ni-daqmx driver software, which helps you achieve shorter setup times and increased productivity. | Avl | RFQ |
| NI-PCI-6521-150-V-Mechanical-Relay-Outputs-30-V-Digital-Inputs | national aerospace standards co | the national instruments pci-6521 is an industrial digital i/o board with eight 150 vac/vdc relay outputs with maximum switching power of 60 w, and eight ¦30 vdc digital inputs with 60 v channel-to-channel isolation and industry-standard 24 v logic levels. the digital inputs accept both sinking and sourcing signals. the ni pci-6521 is a ul listed device with 60 v continuous and 620 vrms withstand (5 seconds) channel-to-channel isolation. for added safety the pci-6521 provides insulated covers on both sides of the board and requires a keyed connector. for added reliability, the pci-6521 features watchdog timers to recover from a variety of computer and application faults. it also features programmable power-up states, digital filtering, and change detection for optimal control over your application. the pci-6521 offers a keyed 37-pin d-sub connector for connecting to ni low-cost high-voltage accessories. pci-6521 takes advantage of ni-daqmx driver software, which helps you achieve shorter setup times and increased productivity. | Avl | RFQ |
| NI-PCI-6520-8-Mechanical-Relay-Outputs-8-Ch-Ch-Isolated-Digital-Inputs | national aerospace standards co | the ni pci-6520 is an industrial digital i/o board with eight ¦60 vdc or 30 vrms relay outputs with maximum switching power of 60 w and eight ¦30 vdc, channel-to-channel isolated digital inputs with industry-standard 24 v logic levels. the digital inputs offer connectivity to both sinking and sourcing signals. for added reliability, the pci-6520 features watchdog timers to recover from a variety of computer and application faults. it also features programmable power-up states, digital filtering, and change detection for optimal control over your application. the board offers a standard 37-pin d-sub connector for connectivity to a wide range of low-cost accessories, and it takes advantage of ni-daqmx measurement services software, which helps you achieve shorter setup times and added productivity. | Avl | RFQ |
| NI-NSC68-5050-SSR-Cable-for-R-Series | national aerospace standards co | the ni nsc68-5050 cable connects one of the r series digital i/o connectors of an ni r series device to solid-state relay (ssr) signal conditioning backplanes. it has a 68-pin vhdci offset male connector on one end, and the other end is terminated by two 50-pin ribbon connectors. | Avl | RFQ |
| NI-ENET-9481-4-Channel-60-VDC-250-Vrms-SPST-Electromechanical-Relay | national aerospace standards co | the ni enet-9481 data acquisition device includes four single-pole single-throw (spst) sourcing digital output channels specifically designed for industrial and control applications. each output channel provides access to a form a electromechanical relay for switching signals up to 30 vdc (2 a), 60 vdc (1 a), or 250 vac (2 a). each output also features an led that indicates the state of that channel. in addition, channel-to-channel isolation protects your system from high-voltage transients, common-mode voltages, and ground loops. ni ethernet data acquisition (daq) ni ethernet daq digital i/o devices combine industry-standard ethernet communication; direct sensor connectivity; and the flexibility of ni labview software for remote monitoring and control of actuators, such as pumps, valves, and relays. with built-in signal conditioning and reliable network communication, ni ethernet daq devices stream data in real time for easy-to-use, high-performance remote measurements and control. ni-daqmx measurement services software each enet-9481 kit includes ni-daqmx 8.9 or later. ni-daqmx driver and measurement services software provides easy-to-use configuration and programming interfaces with features such as the daq assistant and automatic code generation to help reduce development time. every ni ethernet daq device also includes a copy of labview signalexpress le software, so you can quickly acquire, analyze, and present data without programming. application software in addition to labview signalexpress, ni ethernet daq devices are compatible with the following versions (or later) of ni application software: labview 7.1?, labwindowsö/cvi 7.x, and measurement studio 7.x. ni ethernet daq devices are also compatible with ansi c/c++, c#, visual basic .net, and visual basic 6.0. ? ni-daqmx 8.9 (and later) provides support for labview versions 7.1, 8.2, 8.5, 8.6, and later. the mark labwindows is used under a license from microsoft corporation. windows is a registered trademark of microsoft corporation in the united states and other countries. | Avl | RFQ |
| NI-CB-68T-Isothermal-Terminal-Block-with-Cold-Junction-Sensor | national aerospace standards co | caution: ni products typically must be operated with shielded cables and accessories to ensure compliance with electromagnetic compatibility (emc) requirements. to determine if shielded cables or accessories are required for your ni product, refer to the emc specifications in the product's user guide or manual. if shielded cables or accessories are required for emc compliance, do not use unshielded cables or accessories unless they are installed in a shielded enclosure with properly designed and shielded input/output ports and they are connected to the ni product using a shielded cable. if unshielded cables or accessories are not properly installed and shielded, the emc specifications for the product are no longer guaranteed. | Avl | RFQ |
| NI-9481-4-Channel-Relay 30-VDC-2-A 60-VDC-1-A 250-VAC-2 | national aerospace standards co | the national instruments ni 9481 is a 4-channel, single-pole single throw (spst) sourcing digital output module for any ni compactdaq or compactrio chassis. each channel provides access to an electromechanical relay for switching signals up to 30 vdc (2 a), 60 vdc (1 a), 250 vac (2 a) signals and features 250 vrms channel-to-channel isolation. each channel also has an led that indicates the state of that channel. the ni 9481 allows for direct connection to a wide array of industrial devices such as motors, actuators, and dc devices. | Avl | RFQ |
| Model-PIO-SSR-120-120-Ch-P24-SSR-Compatible-ISA-Board-w Digital-I O | keithley instruments | the pio-12, pio-24, pio-96j, and pio-ssr-120 allow up to 120 ttl/nmos/cmos-compatible digital i/o lines to be monitored or controlled by a computer with an isa bus slot. these boards are ideal for controlling relays and process automation. with the pio-24, pio-96j, and pio-ssr-120 you can directly drive solid-state relays. the pio-12 and pio-24 also provide access to the pc?s interrupt input and enable lines, and include connections to the pc's power supplies (¦5v, ¦12v). by using external solid-state relays, the pio-ssr-120 can control and sense voltages up to 280vac and vdc while maintaining 4000vrms of isolation. | Avl | RFQ |
| Model-PDISO-8-Isolated-ISA-Board-w 8-Digital-Inputs-and-8-Relay-Outputs | keithley instruments | the pdiso-8 is a low-cost 8-channel isolated input/output interface board designed for control and sensing applications. the pdiso-8 provides eight electromechanical relay outputs and eight optically isolated inputs, so you can both load (send) and sense signals. the pdiso-8 can be used in various applications including load switching, external-switch sensing, contact closure, and external-voltage sensing. this interface board is easily installed in any isa-bus compatible computer. | Avl | RFQ |
| KPCI-3160 | keithley instruments | model kpci-3160 96-ch, pci board w/ parallel digital i/o and a mass-terminated 100-pin connector | Avl | RFQ |
| 780947-01 | national aerospace standards co | ni enet-9481 4 ch, 60 vdc, 250 vrms, spst electromechanical relay | Avl | RFQ |
| 780942-01 | national aerospace standards co | ni wls-9481 4 ch, 60 vdc, 250 vrms, spst electromechanical relay | Avl | RFQ |
| 780390-01 | national aerospace standards co | vhdci connector, dual stack, 68-pin, r-angle, through hole mount | Avl | RFQ |
| 780389-01 | national aerospace standards co | vhdci connector, 68-pin, vertical, pwb through hole mount | Avl | RFQ |
| 779807-01 | national aerospace standards co | ni usb-621x acc. kit: 4 connectors w/screws, labels, screwdriver | Avl | RFQ |
| 779727-01 | national aerospace standards co | psc-760 power connector for alternate power supply (qty. 2) | Avl | RFQ |
| 779640-01 | national aerospace standards co | usb-6525, 8 ssr +/- 60 vdc, 0.5 a, 8 di +/- 60 vdc, ch-ch iso | Avl | RFQ |
| 779568-01 | national aerospace standards co | ni 9941 backshell for 36-pos high voltage connector block (qty 1) | Avl | RFQ |
| 779475-01 | national aerospace standards co | scc-68 i/o connector with 4 scc module slots | Avl | RFQ |
| 779376-01 | national aerospace standards co | connectors, labels and screwdriver for usb-6501 | Avl | RFQ |
| 779371-01 | national aerospace standards co | ni usb-6008/09 accessories: 4 connectors, 2 labels, 1 screwdriver | Avl | RFQ |
| 779353-01 | national aerospace standards co | cb-37f-lp unshielded, i/o connector block with 37-pin d-sub | Avl | RFQ |
| 779347-01 | national aerospace standards co | bnc-2111 single-ended, shielded bnc connector block | Avl | RFQ |
| 779157-01 | national aerospace standards co | connector, lvds infiniband, right angle | Avl | RFQ |
| 779105-01 | national aerospace standards co | ni 9936 10-pos screw term connector block (qty 10) | Avl | RFQ |
| 779104-01 | national aerospace standards co | ni 9934 25pin d-sub connector kit | Avl | RFQ |
| 779103-01 | national aerospace standards co | ni 9933 37pin d-sub connector kit | Avl | RFQ |
| 779047-01 | national aerospace standards co | daqpad-6015 for usb, screw-terminal connectors, us (120 v) | Avl | RFQ |
| 779017-01 | national aerospace standards co | ni 9932 backshell with 10-pos connector block (qty 1) | Avl | RFQ |
| 779016-01 | national aerospace standards co | ni 9935 15pin d-sub connector kit | Avl | RFQ |
| 778914-01 | national aerospace standards co | connector, .8mm champ, 68 pos, vhdci, through hole | Avl | RFQ |
| 778289-01 | national aerospace standards co | bnc-2121 connector block | Avl | RFQ |
| 777807-01 | national aerospace standards co | bnc-2115 noise rejecting, shielded bnc conn blk for extended i/o | Avl | RFQ |
| 777722-01 | national aerospace standards co | sc-2345 (panelettes, side conn, power from daq device) | Avl | RFQ |
| 777664-01 | national aerospace standards co | ca-1000 connector accessory enclosure | Avl | RFQ |
| 777643-01 | national aerospace standards co | bnc-2110 noise rejecting, shielded bnc connector block | Avl | RFQ |
| 777145-02 | national aerospace standards co | cb-68lpr i/o connector block | Avl | RFQ |
| 777145-01 | national aerospace standards co | cb-68lp low-cost, unshielded i/o connector block | Avl | RFQ |
| 777141-01 | national aerospace standards co | tbx-68 unshielded, i/o connector block with din-rail mounting | Avl | RFQ |
| 777101-01 | national aerospace standards co | cb-50lp low-cost, unshielded i/o connector block | Avl | RFQ |
| 777100-01 | national aerospace standards co | cb-27 i/o connector block | Avl | RFQ |
| 776990-01 | national aerospace standards co | scb-100 noise rejecting, shielded i/o connector block | Avl | RFQ |
| 776844-01 | national aerospace standards co | scb-68 noise rejecting, shielded i/o connector block | Avl | RFQ |
| 776832-01 | national aerospace standards co | 68-pin connector/backshell kit | Avl | RFQ |
| 776455-01 | national aerospace standards co | cb-100 i/o connector block with type nb5 cable, 0.5 m | Avl | RFQ |
| 776164-90 | national aerospace standards co | cb-50 i/o connector block with din rail mounting without cable | Avl | RFQ |
| 34942A | agilent technologies | data logger; no. of channels:4; connector type:75 ohm mini smb ; current rating:0.5a; for use with:3 | Avl | RFQ |
| 196939-01 | national aerospace standards co | ni 9979 strain relief kit for 4-pos power connector | Avl | RFQ |
| 196741-01 | national aerospace standards co | ni 9975 16-pos screw term connector block (qty 2) | Avl | RFQ |
| 196740-01 | national aerospace standards co | ni 9974 36-pos spring term connector block (qty 1) | Avl | RFQ |
| 196739-01 | national aerospace standards co | ni 9976 2 pos screw term connector block (qty 10) | Avl | RFQ |
| 196649-05 | national aerospace standards co | m12 cable, 4-pin male connector to pigtail, 5 m | Avl | RFQ |
| 196648-05 | national aerospace standards co | m12 cable, 2-pin female connector to pigtail, 5 m | Avl | RFQ |
| 194611-01 | national aerospace standards co | ni 9942 4-position connector kit | Avl | RFQ |
| 193406-01 | national aerospace standards co | ni 9922, outdoor enclosure for ni wls-9xxx, w/ethernet & trig con | Avl | RFQ |
| 192692-01 | national aerospace standards co | ni 9939 backshell for 16-pos connector block (qty 1) | Avl | RFQ |
| 192665-01 | national aerospace standards co | ni 9938 4-pos strain relief & high volt. screw term connector kit | Avl | RFQ |
| 187597-03 | national aerospace standards co | thermocouple (type u) connector panel, ca-1000 | Avl | RFQ |
| 187597-02 | national aerospace standards co | thermocouple (type k) connector panel, ca-1000 | Avl | RFQ |
| 187597-01 | national aerospace standards co | thermocouple (type j) connector panel, ca-1000 | Avl | RFQ |
| 187585-01 | national aerospace standards co | 2pin-lemo (female) connector panel | Avl | RFQ |
| 187051-01 | national aerospace standards co | sh68-68r1-ep, shielded cable, right angle connector, 1 m | Avl | RFQ |
| 184738-04 | national aerospace standards co | dual 9-pin (female), d-sub connector panel for ca-1000 | Avl | RFQ |
| 184737-01 | national aerospace standards co | bnc connector panelette, ca-1000 style enclosure | Avl | RFQ |
Low Price
Find it fast
Quality guaranteed
Get it fast
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Remember Us When You’re Looking for Competitively Priced, High-Quality Aviation Parts.
Request for Quote